The EMTIVAC N2BE range has been designed for good efficiency across a wide range of operating vacuums and speeds. These pumps can tolerate large volumes of liquid carry over from the process without damage.
The rugged design is ideally suited to the heaviest duty applications in process industries such as Sugar Mills, Paper Mills, Power Station Condenser Evacuation and Vacuum Filters in Mineral Processing.
The flexible Teflon discharge port valve is an important part of the design as it allows efficient operation at a wide range of compression ratios.
The heavy duty reinforced impeller and flexible discharge porting design allow the pump to handle carry over of liquids and soft solids without damage.
The liquid ring design is quiet and low in vibration (> 85 dB (A)) and requires minimal filtration as there is no metal to metal contact in the operation of the pump.
The standard material is cast iron/carbon steel casings with a carbon steel impeller, full and partial 304 or 316SS construction is also available for more corrosive applications.
A choice of connection positions is available (top or side connection)
STANDARD LOW MAINTENANCE FEATURES
The EMTIVAC N2BE range have removable stainless steel shaft sleeves in the gland packing area to prevent shaft damage from packing friction and to greatly simplify maintenance procedures.
Inspection covers are located at each end of the pump to enable internal inspections and clearances to be checked without dismantling the pump or removing pipework.
Removable bearing housings allow for simple on site bearing changes.
STANDARD HIGH QUALITY CONSTRUCTION
The EMTIVAC N2BE range is manufactured in accordance with certified ISO 9001 quality standards.
Each pump is performance tested for capacity, absorbed power and vibration levels prior to dispatch.
Bearings fitted are of the highest quality, SKF manufacture.
All pumps have a 24 month warranty against any fault in design, materials or workmanship.